Dell Brocade 825 Installation And Reference Manual Download Page 145

Page: 145 / 272

Brocade Adapters Installation and Reference Manual

117

53-1002144-01

Chapter

Boot Code

In this chapter

•

Boot support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

•

Boot code updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118

•

Network boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120

•

Boot over SAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127

•

Fabric-based boot LUN discovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 163

•

Boot systems over SAN without operating system or local drive . . . . . . . . 167

•

Updating Windows driver on adapter used for boot over SAN . . . . . . . . . . 170

Boot support

Boot support is provided for Brocade adapters and drivers installed on your host.

•

To note changes to boot support and procedures detailed in this chapter, please download the
current release notes for your adapter software version from the Brocade adapters website
using the following steps:

a. Go to the adapters website at

www.brocade.com/adapters

b. Navigate to the adapters Downloads page.

c. Select your operating system from the Downloads list to display appropriate download

files.

d. Download the release notes from the “Documentation” section.

The following system BIOS and platforms support Brocade adapters:

•

Peripheral Component Interconnect (PCI) firmware 3.0 and earlier PCI BIOS versions
Boot code for PCI system

•

BIOS
Boot code for x86 and x86_x64 platforms

•

Unified Extensible Firmware Interface (UEFI)
Boot code for UEFI systems

NOTE

UEFI is not supported on the Brocade 804 adapter.

•

PXE (preboot eXecution environment) and UNDI (universal network device interface)
Network boot support for x86 and x86_x64 platforms.

Summary of Contents for Brocade 825

















































































































































































































































































Search results

Summary of Contents for Brocade 825

Reviews:

Brands by name

Popular brands

Dell Brocade 825, Installation And Reference Manual

Search results

Summary of Contents for Brocade 825

Reviews:

Brands by name

Popular brands