manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 40

12

Brocade Adapters Installation and Reference Manual

53-1002144-01

Host bus adapters

1

Storage systems

Using Brocade CNAs you can connect a server (host system) to a Fibre Channel SAN through 
connection with a compatible FCoE switch. For a current list of compatible switches, servers, and 
applications, refer to the latest interoperability matrices on Brocade’s website at 

www.brocade.com/adapters

. 

NOTE

The CNA can connect with a network switch and perform NIC functions for network traffic.

WoL and SoL limitations

The following describes limitations of support for Wake on LAN (WoL) and Serial over LAN (SoL) for 
the Brocade 1007 adapter:

•

WoL. The adapter does not support WoL over its 10GbE links. WoL is supported using the IBM 
BladeCenter 1GbE NIC included on the IBM server blades.

•

SoL. The adapter does not support SoL over its 10GbE links. SoL is supported using the IBM 
1GbE NIC included on the IBM server blades.

Host bus adapters

Brocade 

Table 5

 provides the model number, port speed, number of ports, and adapter type for the 

current Brocade Fibre Channel PCIe HBAs. These adapters provide reliable, high-performance host 
connectivity for mission-critical SAN environments. 

Two types of HBAs are available:

•

Stand-up adapters. 
These are low-profile MD2 form factor PCI Express (PCIe) cards, measuring 6.6 in. by 2.714 in. 
(16.765 cm by 6.89 cm), that install in PCIe connectors in standard host systems.

•

Mezzanine adapters. 
These are smaller cards that mount on server blades that install in blade system enclosures. 
Fibre Channel communications are routed through the adapter ports on the blader server to 
the blade system enclosure midplane and onto the installed switch modules installed in the 
enclosure.

TABLE 5

HBA model information

Model Number

Port Speed

Number of Ports

Adapter Type

425

4 Gbps maximum

1

1.

A 4 Gbps SFP installed in Brocade 815 or 825 HBAs allows 4, 2, or 1 Gbps. 

2

Stand-up

415

4 Gbps maximum

1

1

Stand-up

804

8 Gbps maximum

2

Mezzanine

815

8 Gbps maximum

2

2.

An 8 Gbps SFP+ installed in Brocade 425 or 415 HBAs allows 4 or 2 Gbps only.

1

Stand-up

825

8 Gbps maximum

2

2

Stand-up

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands