manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 25

Brocade Adapters Installation and Reference Manual

xxv

53-1002144-01

•

Install logs

•

Core files

•

Details on the CNA or Fabric Adapter Ethernet interface, including IP address and mask.

•

Status and states of all adapter ports, including the Ethernet, FCoE, and DCB ports on CNAs 
and Fabric Adapters.

•

DCB status and statistics for CNAs and Fabric Adapters

•

Network driver information, Ethernet statistics, offload parameters, and flow control coalesce 
parameters for CNAs and Fabric Adapters.

•

Ethernet offload and flow control parameters for CNAs and Fabric Adapters.

NOTE

Before collecting data through the Support Save feature, you may want to disable auto-recovery on 
the host system. When adapters are reset after an auto-recovery from a failure, traces initiated 
before the failure may be lost or overwritten. 

To disable auto-recovery, use the following commands:

•

For Linux, use the following commands, then reboot the system:

-

To disable auto-recovery for the network (BNA) driver.

insmod bna.o bnad_ioc_auto_recover=0

-

To disable auto-recovery for the storage (BFA) driver.

insmod bfa.o ioc_auto_recover=0

•

For VMware, use the following commands.

-

To unload and load the network (BNA) driver with IOC auto-recovery disabled, use the 
following commands:

esxcfg-module -u bna

esxcfg-module bna bnad_ioc_auto_recover=0

-

To disable IOC auto-recovery for the network (BNA) driver across reboots, use the following 
command:

esxcfg-module -s "bnad_ioc_auto_recover=0" bna

-

To disable IOC auto-recovery for the storage (BFA) driver across reboots, use the following 
command:

esxcfg-module -s "ioc_auto_recover=0" bfa

•

For Windows use the Registry Edit tool (regedt32) or the BCU drvconf --key command. 
Following is the drvconf ---key command:

bcu drvconf --key ioc_auto_recover --val 0

•

For Solaris, edit /kernel/drv/bfa.conf using the following command:

ioc-auto-recover=0

NOTE

Brocade 804 and 1007 adapters are not supported on Solaris systems.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands