manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 197

Brocade Adapters Installation and Reference Manual

169

53-1002144-01

Boot systems over SAN without operating system or local drive

4

Creating a WinPE image

Microsoft Windows Preinstallation Environment (Windows PE) is a bootable tool that provides 
minimal operating system features for installation, troubleshooting. and recovery. Please refer to 
the 

Microsoft Preinstallation Environment User's Guide

 for more information about Windows PE.

You can customize WinPE to boot a diskless host system (system without a hard disk or operating 
system) that contains Brocade Fibre Channel adapters and accomplish the following tasks.

•

Update the firmware and BIOS/EFI images in the adapter. The adapter tools and utilities 
bundled in the driver aid in updating the adapter flash.

•

Install pre-configured Windows system images from a network share onto new computers that 
access the storage through Brocade adapters.

Use the following procedures to create a WinPE image that includes the Brocade driver package 
and utilities for your system.

1. Download Windows Automated Installation Kit (WAIK) for Windows 7 from the Microsoft 

website. This kit is in .ISO format.

2. Create a bootable CD or USB drive from this image using appropriate burning software and 

install WAIK on your local system where you will create the WinPE image.

3. Determine the appropriate adapter driver package for your operating system and host platform 

using information in 

“Software installation and driver packages”

 on page 43. 

The WinPE image creation is based on the Vista kernel. Therefore, use the driver package for 
Windows Server 2008 or later. You cannot use the Windows Server 2003 driver packages to 
create the WinPE image.

4. Download the latest Windows Server 2008 driver package for your host platform from the 

Brocade adapters website using the following steps.

a. Go to the adapters website at 

www.brocade.com/adapters

. 

3. Navigate to the adapters Downloads page. 

4. Select your operating system from the Downloads list to display appropriate download 

files.

b. Download the file from the “Driver Packages” area. 

This package contains the script build_winpe.bat, which you will use to create the customized 
WinPE image.

5. Double-click the driver package and extract to a folder (such as C:\temp) on your local system. 

The build_winpe.bat script will be located under the 

\util

 sub-directory.

6. Go to 

C:\temp\util

 and enter the following command to create the WinPE iso image.

build_winpe.bat

7. Burn the ISO image into a CD or USB drive using appropriate software.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands