manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 94

66

Brocade Adapters Installation and Reference Manual

53-1002144-01

Installation notes

3

Installation notes

Please read through the following notes before installing adapter software:

•

For details on operating system requirements for installing adapter drivers, refer to 

“Operating 

system support”

 on page 40 and 

“Software installation and driver packages”

 on page 43. Also 

download the latest release notes from the Brocade adapters website using the following 
steps:

a. Go to the adapters website at 

www.brocade.com/adapters

. 

b. Navigate to the adapters Downloads page. 

c. Select your operating system from the Downloads list or download the ISO image.

d. Download the release notes from the “Documentation” section. 

•

Find the installer program for your host’s operating system and platform under 

“Software 

installation and driver packages”

 on page 43. Following are generic names for the Installer 

program for supported operating systems.

-

Windows systems

brocade_adapter_software_installer_windows_<version>.exe

-

Linux systems

brocade_adapter_software_installer_linux_<version>.bin

brocade_adapter_software_installer_linux_<platform>_<version>.bin

-

Solaris systems

brocade_adapter_software_installer_Solaris10_<platform>_<version>.bin 

NOTE

The <platform> variable in the installer commands is the host system architecture, such 
as SPARC, x86, or x64.

•

The Brocade Adapter Software Installer is not supported on the VMware ESX platforms for 
installing drivers, HCM, or utilities. However, you can use an appropriate Brocade Adapter 
Software Installer to install HCM on a “guest” system. For VMware, drivers and utilities are 
provided as ISO images packed in a tarball. A Brocade installer script is available for 
installation.

•

To use the Brocade Adapter Software Installer on Linux RHEL 6.0 x64 systems, you must install 
the x32-compatible libraries as they are not installed by default. Refer to 

“RHEL 6.x version x64 

systems”

 on page 69 for procedures.

•

Software installation or upgrade on a host system with a large number of adapters could take 
much longer than normal.

•

If you receive errors when launching the GUI-based Brocade Adapter Software Installer, such 
as InvocationTargetException errors, your system may not be able to run a GUI-based 
application. Instead use the instructions under 

“Software installation using Software Installer 

commands”

 on page 76.

•

Brocade 804 and 1007 adapters are not supported on Solaris systems so Solaris commands 
in this section do not apply.

•

After installing drivers on a Linux or Solaris system, you must reboot the system to enable the 
drivers.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands