manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 21

Brocade Adapters Installation and Reference Manual

xxi

53-1002144-01

Adapters

For adapter resources, such as product information, software, firmware, and documentation, visit 
the adapters website 

www.brocade.com/adapters

.

For additional information on Brocade adapters, refer to the following publications:

•

The 

Brocade Quick Installation Guide

 (provided with your adapter model).

•

Brocade Adapters Troubleshooting Guide

•

Brocade Adapters Administrator’s Guide

•

CIM Provider for Brocade Adapters Installation Guide

 

FCoE Switch

For information on the Brocade FCoE Switch for connecting stand-up CNAs and Fabric Adapter 
ports configured in CNA mode, refer to the following publications:

•

Brocade 8000 Hardware Reference Manual 

•

WebTools Administrator’s Guide

•

EZSwitchSetup Administrator’s Guide

•

Fabric OS Command Reference Manual

Blade servers and blade system enclosure components

The Brocade mezzanine card adapters are compatible with blade servers, switch modules, 
interconnect modules, I/O modules, and other components that install in supported blade system 
enclosures. For compatibility information, visit the compatible blade server and blade system 
enclosure manufacturer’s website. Also refer to 

“Hardware compatibility”

 on page 10.

SAN information

White papers, online demonstrations, and data sheets are available through the Brocade website 
at:

http://www.brocade.com/products-solutions/products/index.page

For additional Brocade documentation, visit the Brocade website:

http://www.brocade.com

Other industry resources

For additional resource information, visit the Technical Committee T11 website. This website 
provides interface standards for high-performance and mass storage applications for Fibre 
Channel, storage management, and other applications:

http://www.t11.org

For information about the Fibre Channel industry, visit the Fibre Channel Industry Association 
website:

http://www.fibrechannel.org

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands