manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 72

44

Brocade Adapters Installation and Reference Manual

53-1002144-01

Adapter software

1

Note that in the following ISO file name that the <date> will be replaced by the date of the 
software. 

brocade_adapter_software_ISO_<date>.iso

Download the driver package and boot image for your host system operating system and platform 
from the Brocade adapter website. Use the following steps.

1. Go to the adapters website at 

www.brocade.com/adapters

. 

2. Navigate to the adapters Downloads page. 

3. Select your operating system from the Downloads list to display appropriate download files or 

download the ISO image.

NOTE

In the package name, <version> indicates the software version number (for example v2-0-0), which 
will change for each release. The <platform> indicates the host processor type, such as x86 or 
x86_64. Network drivers are not supported on HBAs and Fabric Adapter ports configured in HBA 
mode.

NOTE

Although the following table lists all adapter software packages that you can download for specific 
operating systems and platforms, your adapter release may not be supported some of these 
operating systems and platforms. Refer to 

“Operating system support”

 on page 40 and the latest 

release notes for your adapter for more information.

TABLE 9

Supported software installation packages 

Operating 
System and 
Platform

Brocade Adapter Software Installer

Driver Package 

Windows 
Server 
2003 
(x86)

brocade_adapter_software_installer_
windows_<version>.exe

Installs HCM and appropriate driver 
package.

brocade_driver_win2003_x86_<version>.exe

Storport miniport storage and network drivers with HCM 
Agent for Standard/Enterprise Server on x86 platforms. 
This package also contains installer script 
(brocade_installer.bat).

Windows 
Server 
2003 
(x86_64)

brocade_adapter_software_installer_
windows_<version>.exe

Installs HCM and appropriate driver 
package.

brocade_driver_win2003_x64_<version>.exe

Storport miniport storage and network drivers with HCM 
Agent for Standard/Enterprise Server on the EM64T and 
AMD64 platforms. This package also contains installer 
script (brocade_installer.bat).

Windows 
Server 
2008 
(x86)

1

 

brocade_adapter_software_installer_
windows_<version>.exe

Installs HCM and appropriate driver 
package.

brocade_driver_win2008_x86_<version>.exe

Storport miniport storage and network drivers with HCM 
Agent for Standard/Enterprise Server on EM64T and 
AMD64 platforms. This package also contains installer 
script (brocade_installer.bat).

Windows 
Server 
2008 R2
(x64)

2

 

brocade_adapter_software_installer_
windows_<version>.exe

Installs HCM and appropriate driver 
package.

brocade_driver_win2008_R2_x64_<version>.exe

Storport miniport storage and network drivers with HCM 
Agent for Standard/Enterprise Server on EM64T and 
AMD64 platforms. This package also contains installer 
script (brocade_installer.bat).

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands