manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 134

106

Brocade Adapters Installation and Reference Manual

53-1002144-01

Confirming driver package installation

3

Confirming driver installation with Solaris tools

Verify if the driver packages installed successfully using the following commands:

NOTE

Brocade 804 and 1007 adapters are not supported on Solaris systems, so commands in this section 
do not apply to these adapters.

•

These commands display information about loaded kernel modules.

modinfo|grep bfa

modinfo|grep bna

If the storage driver package is installed, bfa Brocade Fibre Channel Adapter Driver should 
display. 

If the network driver package is installed, bna Brocade Fibre Channel Adapter Driver should 
display. 

•

These commands check for and lists the installed driver package files.

pkgchk -nv bfa

pkgchk -nv bna

•

This command displays all available information about software packages or sets that are 
installed on the system.

pkginfo -l

For example, if the storage driver package is installed, bfa_pkg should display with a 
“complete” install status in the list of installed packages.

PKGINST:  bfa

      NAME:  Brocade Fibre Channel Adapter Driver

  CATEGORY:  system

      ARCH:  sparc&i386

   VERSION:  alpha_bld31_20080502_1205

   BASEDIR:  /

    VENDOR:  Brocade

      DESC:  32 bit & 64 bit Device driver for Brocade Fibre Channel adapters

    PSTAMP:  20080115150824

  INSTDATE:  May 02 2008 18:22

   HOTLINE:  Please contact your local service provider

    STATUS:  completely installed

VMware

Verify if the adapter driver installed successfully using the following commands:

esxcli software vib list | grep bfa

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands