manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 20

xx

Brocade Adapters Installation and Reference Manual

53-1002144-01

Key terms

For definitions specific to Brocade and Fibre Channel, see the technical glossaries by logging into 

http://my.brocade.com

. 

For definitions specific to this document, see 

Appendix C, “List of Acronyms”

.

For definitions of SAN-specific terms, visit the Storage Networking Industry Association online 
dictionary at: 

http://www.snia.org/education/dictionary

Notice to the reader

This document may contain references to the trademarks of the following corporations. These 
trademarks are the properties of their respective companies and corporations.

These references are made for informational purposes only.

Additional information

This section lists additional Brocade and industry-specific documentation that you might find 
helpful.

Brocade resources

To get up-to-the-minute information, go to 

http://my.brocade.com

 to register at no cost for a user ID 

and password. A variety of resources for Brocade products is available.

Corporation

Referenced Trademarks and Products

Microsoft Corporation

Windows, Windows Server 2003, Windows Server 2008, Vista, 
XP, PE for Windows, Hyper V for Windows, Windows Automated 
Installation Kit (WAIK), and Windows 7

Oracle Corporation

Solaris

Red Hat Inc.

Red Hat Enterprise Linux (RHEL)

Novell, Inc.

SUSE Linux Enterprise Server (SLES)

VMware Inc.

ESX Server

SPARC International, Inc.

SPARC

Hewlett Packard Corp.

BladeSystem

IBM

BladeCenter 

Dell

PowerEdge

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands