manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 78

50

Brocade Adapters Installation and Reference Manual

53-1002144-01

Boot installation packages

1

•

An ISO 9660 (.iso) optical disk image containing all files listed in the supported software 
installation packages table (

Table 9

 on page 44) and boot installation packages table 

(

Table 10

 on page 51). Use this image to create CDs or USB drives to carry with you for 

installation. The image also contains product documentation, such as product manuals, 
current release notes, and licensing information. For Windows systems only, if using a DVD 
created with the ISO image, the correct installer program will automatically execute for your 
system. Make sure that the autorun feature is enabled.
Note that in the following ISO file name, <date> will be replaced by the release date of the 
software.

brocade_adapter_software_ISO_<date>.iso

Download this image from the Brocade adapters website at the Brocade adapters website 
using the following steps:

a. Go to the adapters website at 

www.brocade.com/adapters

. 

b. Navigate to the adapters Downloads page. 

c. Perform one of the following steps:

•

Select your operating system from the Downloads list to display appropriate download 
files.

•

Select Download ISO Image to download brocade_adapter_software_ISO_<date>.iso.

•

Adapter boot code image. This contains BIOS and UEFI boot code and firmware used by the 
boot code to boot from the adapter. Load this code to option ROM on the adapter using the 
BCU boot --update command. Download this image from the Brocade adapters website using 
the following steps:

a. Go to the adapters website at 

www.brocade.com/adapters

. 

b. Navigate to the adapters Downloads page. 

c. Select your operating system from the Downloads list to display appropriate download 

files.

d. Download the boot code image from the Boot Code section.

NOTE

To keep drivers and boot code synchronized, be sure to update your adapter with the latest 
boot image whenever you install or update adapter driver packages. Refer to 

“Boot code 

updates”

 on page 118 for instructions.

Table 10

 describes the installation packages for boot support that you can download for each 

supported operating system. The table provides the operating system, the driver update disk (DUD) 
image, the LiveCD, and the boot code.

NOTE

Although the following table lists all boot packages that you can download for specific operating 
systems and platforms, your adapter release may not be supported some of these operating 
systems and platforms. Refer to 

“Operating system support”

 on page 40 and the latest release 

notes for your adapter for more information.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands