manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 18

xviii

Brocade Adapters Installation and Reference Manual

53-1002144-01

•

Solaris 11, except Open Solaris (x86, x64, and SPARC)

•

VMware ESX Server 4.0, 4.1, 5.0 (x64)

NOTE

HCM is not supported in ESXi systems.

NOTE

HCM is supported only on the guest operating system for VMware. 

•

Oracle Enterprise Linux (OEL) 5.6, 6.0 (x86 and x64)

NOTE

Specific operating system service patch levels and other patch requirements are detailed in the 
current release notes for your adapter software version.

What’s new in this document

This document adds details on adapter software release 3.0 and the Brocade 1860 Fabric Adapter. 
For further information about new features not covered in this document and documentation 
updates, refer to the release notes for your adapter software version.

Document conventions

This section describes text formatting conventions and important notice formats used in this 
document.

Text formatting

The narrative-text formatting conventions that are used are as follows:

bold text

Identifies command names
Identifies the names of user-manipulated GUI elements
Identifies keywords and operands
Identifies text to enter at the GUI or CLI

italic

 text

Provides emphasis
Identifies variables
Identifies paths and Internet addresses
Identifies document titles

code

 text

Identifies CLI output
Identifies command syntax examples

For readability, command names in the narrative portions of this guide are presented in mixed 
lettercase: for example, switchShow. In actual examples, command lettercase is often all 
lowercase. 

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands