manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 126

98

Brocade Adapters Installation and Reference Manual

53-1002144-01

Using software installation scripts and system commands

3

•

Network drivers - bna_driver_<operating system>_<version>.pkg

•

User utilities - brcd_util_<operating system>_<version>.pkg

Refer to 

“Software installation and driver packages”

 on page 43 for a description of host systems 

that this driver package supports. 

NOTE

Root access is required to install or remove the driver package.

1. Log on to the Solaris system as a super user.

2. Copy the brocade_driver_<operating system>_<version>.tar to a temporary directory on your 

system.

NOTE

brocade_driver_<operating system>_<version>.tar contains all drivers for specific Solaris 
distributions. For example, brocade_driver_solaris10_<version>.tar contains all storage 
drivers for Solaris 10 systems, where <version> is the version number of the driver release. 

3. Using the change directory (cd) command, change to the directory where you copied the driver 

file.

4. Perform the following steps.

a. Enter the following command and press Enter to untar the file.

# tar xvf brocade_driver_<operating system>_<version>.tar

This extracts the driver, packages, utilities packages, and installation script:

•

Storage drivers - bfa_driver_<operating system>_<version>.pkg

•

Network drivers - bna_driver_<operating system>_<version>.pkg

•

User utilities - brcd_util_<operating system>_<version>.pkg

•

Installation script - brocade_install.sh

b. Enter the following command to remove all old packages (if installed) and install new ones.

# ./brocade_install.sh

5. Enter the following to restart, load the driver, and reconfigure the system:

# reboot --r

6. Verify if the driver and utility packages are loaded to the system with the following commands:

# pkginfo|grep bfa

# pkginfo|grep bna

# pkginfo|grep brcd-util

NOTE

You can use the pkginfo -l command to display details about installed drivers.

7. Start the HCM Agent by using steps under 

“HCM Agent operations”

 on page 112.

NOTE

Manually installing the driver package does not automatically start the HCM Agent.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands