manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 129

Brocade Adapters Installation and Reference Manual

101

53-1002144-01

Using software installation scripts and system commands

3

•

To display help, enter one of the following commands:

brocade_install.sh -h

brocade_install_esxi.sh -h

4. Reboot the system.

5. Determine if the driver package is installed using the following commands: 

esxcfg-module -l

This lists loaded module names. Verify that an entry for bfa exists for the storage driver and an 
entry for bna exists for the network driver. 

cat /proc/vmware/version

This displays the latest versions of installed drivers. Look for bfa (storage driver) and bna 
(network driver) entries and related build number.

6. Start the HCM Agent by using steps under 

“HCM Agent operations”

 on page 112.

NOTE

Manually installing the driver package does not automatically start the HCM Agent.

7. When the driver is installed and host is connected to the fabric, turn on the host system and 

verify adapter operation. Verify proper LED operation for stand-up adapters by referring to one 
of the following locations:

•

“Adapter LED operation (stand-up adapters)”

 on page 184.

•

“Adapter LED operation (stand-up adapters)”

 on page 191

Installation on ESXi 4.0 and 4.1 systems

Drivers are provided as ISO images packaged in a tarball. Use the install script to selectively install 
storage and network driver packages with utilities to VMware systems. Refer to 

“Software 

installation and driver packages”

 on page 43 for a description of host systems that this VMware 

driver package supports. 

Prerequisites

•

The vSphere Management Assistant (vMA) must be installed on an ESX system other than 
where you are installing the driver. Download vMA from the VMware website. Once vMA is 
downloaded please refer to the 

vSphere Management Assistant Guide

 for instructions on how 

to deploy vMA.

•

Put the ESXi server (where the driver is to be installed) in maintenance mode using vSphere 
client. Using the vSphere Client, right click ESXi and select the Enter Maintenance Mode 
option.

Procedure

1. Download the VMware driver package from the Brocade website, then copy it to a temporary 

(/tmp) directory on your ESXi system.

2. From the temporary directory, extract the file using the following command:

tar zxvf brocade_driver_<esxversion>_<driverversion>.tar.gz

3. Power on the vMA virtual machine.

4. Follow instructions from 

vSphere Management Assistant Guide

 to set DHCP and the password.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands