manualshive.com logo in svg

Dell Brocade 825, Installation And Reference Manual

Share
Download
Dell Brocade 825 Installation And Reference Manual Download Page 85

Brocade Adapters Installation and Reference Manual

57

53-1002144-01

Stand-up adapters

2

8. Install the longer, standard bracket on the adapter if the low-profile mounting bracket (shipped 

installed on adapter) does not fit your system case. Use the following steps. If the installed 
low-profile bracket works, go on to 

step 9

.

a. Remove all SFP transceivers from the adapter. Refer to 

“Removing and installing SFP 

transceivers”

 on page 59 for procedures.

b. Remove the two screws attaching the bracket to the adapter, and pull off the bracket. Refer 

to 

Figure 8

.

FIGURE 8

Removing or installing adapter mounting bracket

c. Carefully guide the new mounting bracket onto the adapter, making sure the bracket 

mounting tabs align with the holes in the adapter.

d. Replace and tighten the two screws. 

e. Store the mounting bracket that you removed for future use.

9. Insert the adapter into the desired empty PCIe bus slot. Press firmly until the adapter seats. 

Refer to 

Figure 9

 for seating directions.

Summary of Contents for Brocade 825

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands