Cumberland EDGE 890-00601, Installation And User Manual

Page: 82 / 258

Chapter 9: Curves and schedules
Line number Read only, but also used to select a line for the delete button*
Intensity Desired bulb intensity
Output Output required to achieve desired intensity
Light name Selected output name as entered at configuration time
Expansion box
Selects an enclosure to test the curve
Slot Selects a slot within selected enclosure to test the curve
Output Selects a variable output within selected module (slot) to test the curve. Ideally only shows
only variable light outputs.
Amp draw Displays current amp draw at selected output
Manual to auto
switch Switch output to manual or auto mode
0-10V DC output voltage. Operates as other test widgets excepts it shows volts.
Takes current voltage output and copies it besides corresponding intensity.
*Pressing the line number (1-11) selects a line. With a line selected, pressing the delete button (the trash
can) clears the fields in the line. A curve with less than 11 points is permitted. Intensity and output must
increase with each line. In the following example, the light cannot be driven below 20% capacity (5.21V).
This means that in a light schedule, if that light is set in the 1-20% capacity range it will be On at 20%.
82 895-00693 EDGE