Cumberland EDGE 890-00601, Installation And User Manual

Page: 53 / 258

6
User management
Topics Covered in this Chapter
▪ User management
User management
Access levels
There are three levels of privileges. Depending on the access type, controller settings, and whether you
are accessing the system locally or remotely, you might have to log on:
Access level Local, PIN off Local, PIN on Remote
0 – No privileges No need to log on No need to log on Must log on
1 – Operation privileges Must log on
2 – Setup privileges
The following are the rights that come with the different access levels:
No privileges
Operation privileges Setup privileges
Can navigate anywhere in the
controller All the No privileges rights All the Operation privileges rights
Can change the language setting Can change all values in the opera-
tion pages Full access to setup
Can’t acknowledge alarms and
troubles Can acknowledge alarms and
troubles Full access to settings
Can’t change any value, text, or
check box Can’t change any value in setup
and setting pages Software updates
Use of a PIN
You can either choose to use a PIN number when accessing the controller locally or you can choose to
disable PINs. To change this option, you must press on the
Use PIN locally box that is located in the
System configuration menu under Site name . When the PINs are turned off, setup privileges are avail-
able. A default user called Admin is logged on at all times when the PINs are turned off , and all settings
are available to all users. A PIN must always be used when logging on to the system remotely.
User creation
The users you create can access the system locally or remotely. You can create, delete and duplicate
users. When duplicating, only the following fields are duplicated:
• User name (you must modify this field)
• Access level
895-00693 EDGE 53