Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 95 / 134

Removing a Stuck Plate From the Output Device 81
CAUTION: Use caution when handling the powerful magnetic trailing-edge
clamps used to hold the media on the imaging drum.
•
Operators with implanted cardiac pacemakers should ensure that
magnetic clamps are kept more than 2.75" (7 cm) away from their
pacemaker.
•
When handling the magnetic clamps, do not bring opposite poles near
each other. Keep hands and fingers from between opposite magnetic
poles.
•
Always wear protective gloves when handling magnetic clamps.
If you have additional concerns, consult your physician and/or the
manufacturer of your implant.
CAUTION: Keep magnetic data—floppy disks, magnetic stripe cards, watches,
etc.—away from the powerful magnetic trailing-edge clamps.
To remove a plate from the drum:
1.
Open the top and front access panels.
See Opening and Closing the Front Access Panel on page 35.
2.
Put on protective gloves.
Protective gloves should be clean and lint-free to ensure the interior of
the output device is kept clean.
CAUTION: Plate edges are sharp. Failure to wear protective gloves can
result in personal injury.
3.
If the plate is held by the trailing-edge clamps, slide the clamps off the
plate. Otherwise, skip this step.