Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 27 / 134

Media Processing 13
Media Processing
Some of the media supported by the Trendsetter 3244+ AL need to be
processed after they are imaged in the output device. Refer to the media’s
documentation for information on processing your media.
Features of the Trendsetter 3244+ AL
Interlock System
The output device is equipped with an interlock system for your safety. If
you open or remove an output device access panel, the interlock system
will halt mechanical activity and disable the exposure head to prevent laser
emissions. This system is especially important with the thermal technology
of the output device, because laser emissions from a thermal exposure
head are invisible to the naked eye and are very dangerous if they contact
the skin or eyes.
If mechanical movements do not stop when you open or remove an access
panel, do the following:
•
shut down the output device
•
close or replace the panel
•
contact your service representative
Do NOT touch or attempt to stop moving internal parts of the output
device.
DANGER: Interfering with the interlock system can result in serious
personal injury from visible and invisible high-powered laser radiation,
electrical shock, and/or moving mechanical parts. Do NOT tamper with
the safety interlock switches in an attempt to operate the output device
with any of the access panels open, and do NOT attempt to open or
remove access panels while the output device is imaging a medium.