Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 91 / 134

Error Messages and Recommended Solutions 77
Table 12: Error Category: SCSI
Media type out of range.
[Error #: N/A]
To correct the error:
1.
From the
Trendsetter
menu in the workstation
software, select
Media Configuration
.
The Media Configuration dialog box is displayed.
2.
Ensure the media type is listed under
Available
Media
.
3.
Record the error message, and call your service
representative.
One or both plate dimensions too
small.
[Error #: N/A]
To correct the error:
1.
Check the plate type information to ensure the
medium size stated on the workstation matches the
size you loaded.
2.
If the medium sizes match:
In the Suspend dialog box on the workstation, click
the
Resume
button to resume imaging.
Or:
If the medium sizes don’t match:
Click the
Cancel Image
button in the Suspend dialog
box, and modify the media size as needed.
Or:
Load a different-sized medium into the output
device.
Error Category: Laser
Error Message Recommended Operator Action