Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 97 / 134

Removing a Stuck Plate From the Output Device 83
.
Figure 35: Remove plate
7.
Open each leading-edge clamp, and inspect for debris.
8.
In the Suspend dialog box on the workstation, click the
Resume
button.
Another message is displayed, indicating that the trailing-edge clamps
must be placed in the park position.
9.
Reposition the trailing-edge clamps.
See Repositioning the Trailing-Edge Clamps on page 83.
10.
Close the top and front access panels.
See Opening and Closing the Front Access Panel on page 35 for more
information.
Repositioning the Trailing-Edge Clamps
Use the following procedure to reposition the trailing-edge clamps in the
output device, for example, when:
•
you moved the clamps in order to remove a medium from the drum
•
the clamps were dropped by the output device
•
the following error message is displayed on the workstation:
move clamps to park position, then select RESUME