Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 45 / 134

For Your Safety 31
For part replacement information, see Appendix A, Part Numbers .
For Your Safety
Output device access panels are fitted with an interlock system that
protects against injury from laser radiation and moving mechanical parts.
If a panel is opened or removed while the output device is operating, all
mechanical moving parts will stop activity. If mechanical movements do
not stop, do the following:
•
turn off the output device
•
close or replace the access panel
•
contact your service representative
Do NOT touch or attempt to stop moving internal parts of the output
device.
Debris removal
cabinet Ablative media filter See page 51 When error
message
appears on
workstation
Desiccant box Desiccant box contains a
desiccant bag which
controls humidity within
the output device See page 51 N/A When
indicator on
box turns pink
Load panel Mylar strip See page 54 N/A 6 months
Location Description Maintenance
Procedure Clean Replace Every
DANGER: Interfering with the interlock system can result in serious
personal injury from visible and invisible high-powered laser radiation,
electrical shock and/or moving mechanical parts. Do NOT tamper with
the safety interlock switches in an attempt to operate the output device
with any of the access panels open, and do NOT attempt to open or
remove access panels while the output device is imaging a medium.