Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 46 / 134

32 Chapter 3 – Maintenance
Cleaning Exterior Surfaces
Clean the exterior of the output device weekly.
Cleaning the exterior surfaces of the output device preserves the
appearance and finish, and ensures that visual indicators and markings are
clearly visible. More importantly, regular cleaning reduces the amount of
dust that can fall into the device when access panels are removed or
opened. The most sensitive areas for dust accumulation are the side panels
and the front access panel that is lifted to access the interior of the machine.
If your output device has a debris removal system, clean the cabinet
exterior weekly.
Reliable and high-quality output depends on keeping the exterior of the
output device clean.
Cleaning Recommendations
Before cleaning the exterior surfaces of the output device, vacuum all
access panel seams to remove any accumulated dust. It may be sufficient to
simply wipe the surfaces clean with dry rags, if it is done frequently and if
the environment is relatively dry and free of vapors. A more thorough
cleaning requires using cloths dampened with water and mild detergent.
CAUTION: Do not let water run freely over or get inside the output device.
This can result in electrical shock, as well as damage to the equipment.
Note: When cleaning the exterior of the output device, use dampened rags with
a mild dish detergent. All soap residue must be thoroughly wiped off with a
clean, damp rag.