Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 80 / 134

66 Chapter 4– Troubleshooting
Plates are sticking
together. Please open the
plate cover and separate
plates. Press Resume to
continue.
[Error #: 15319]
The output device is having trouble picking plates, possibly
because they are sticking together.
To correct the error:
1.
Check the plates in the stack to be sure they are not
sticking together: separate any that are sticking together.
2.
Close the operator door.
3.
In the Suspend dialog box on the workstation, click the
Resume
button.
Please close access door.
[Error #: 15335]
An access panel has been opened or removed from the
output device. The output device will not operate when an
access panel has been opened or removed.
To correct the error:
1.
Close or replace the panel in question.
2.
In the Suspend dialog box on the workstation, click the
Resume
button.
3.
If the output device does not return to normal operation,
contact your service representative.
Please close cover plate.
[Error #: 15313]
The output device cannot load or image media while the
operator door and/or manual bypass panel are open.
To correct the error:
1.
Close the operator door and/or the manual bypass panel.
2.
In the Suspend dialog box on the workstation, click the
Resume
button.
3.
If the output device does not return to normal operation,
contact your service representative.
Error Category: Auto Loader (ALE)
Error Message Recommended Operator Action