Creo Trendsetter 3244+ AL, Operator'S Manual

Page: 65 / 134

Replacing the Desiccant Bag 51
9.
Vacuum and wipe down the interior of the canister with a dry rag.
10.
Check to make sure that the blower hose hole at the bottom of the
canister is free of debris.
11.
Check the new filter to make sure that the seal on the bottom is clean.
12.
Insert the new filter into the canister.
Four tabs in the bottom of the canister will help you to center it.
13.
Rotate the filter until it is properly seated.
14.
Fold the filter handle down.
15.
Replace the canister lid and close its four latches.
16.
Check to make sure that the lid is sealed.
17.
Close the cabinet by lifting the top slightly to release the locked
support strut, then shutting the lid.
Replacing the Desiccant Bag
Depending on the operating environment, the desiccant bag—which
regulates the humidity level inside the output device—may need to be
replaced as frequently as every two weeks.