C200H AC Servo Manual
61
No.
Name
Function
Rang
Default
Value
3
Initial
display
status
0:Display motor speed.
1:Display the current position is 5-bit low.
2:Display the current position is 5-bit high.
3:Display position command.
(command pulse accumulation) is 5-bit low.
4:Display position command.
(command pulse accumulation) is 5-bit high.
5:Display position deviation is 5-bit low.
6:Display position deviation is 5-bit high.
7:Display motor torque.
8:Display motor current.
9:Display control mode.
10:Display temperature.
11:Display speed command..
12:Display torque command.
13:Display absolute position of the rotor in a roll
is 5-bit low.
14:Display absolute position of the rotor in a roll
is 5-bit high.
15:Display input terminal state.
16:Display output terminal state.
17:Display encoder input signal.
18:Display voltage value of main line of main
circuit.
19:Display alarming code.
20:Display logic chip version number.
21:Display the actuation state of the relay.
22:Display external voltage state.
23:Display external voltage state.
24:Absolute position 5-bit low.
25: Absolute position 5-bit high.
0-25
0
Summary of Contents for C200H Series
