Coolmay C200H Series, Manual

Page: 4 / 119

C200H AC Servo Manual
https://en.coolmay.com/

The U 、 V 、 W motor output terminal and the motor wiring terminal must be
connected one-to-one correspondence, otherwise the motor may cause
equipment losing and casualties caused by the over speed vehicle.

Please fasten the power supply and motor output terminals, otherwise it may
cause fire.
3.Operation
Caution

When the mechanical equipment starts operation, it must match proper
parameters. If it does not adjust to the appropriate setting values, it may cause
the mechanical equipment to lose controlling.

Before starting operation, please confirm if you can start emergency switch
shutdown at any time.

Please test whether the servo motor is running normally without load firstly,
and then connect the load to avoid unnecessary loss.

Do not switch on and off power frequently, otherwise it will cause drive
overheating.
4.Working
Prohibition

When the motor is running, it is forbidden to touch any parts in rotation,
otherwise it will cause casualties.

When the equipment is in operation, it is forbidden to move connecting
cables, otherwise it will cause injury to the person or damage to the
equipment.
5. Maintenance and inspection
Prohibition

Do not touch the inside of the driver and its motor, otherwise it will cause
electric shock.

When the power is started, do not disassemble the driver panel, otherwise it