Coolmay C200H Series, Manual

Page: 84 / 119

C200H AC Servo Manual
77
Value
76
Speed
coincidence
range
When the difference between the actual speed
and the instruction speed is less than this
setting, the UCO2N(speed coincidence) is ON,
otherwise OFF.
0-1000
r/min
10
77
2
nd
numerator of
electronic gear
for position
command pulse
Refers to parameter PA12. 0-32767 0
78
3
rd
numerator of
electronic gear
for position
command pulse
Refers to parameter PA12. 0-32767 0
79
4 th numerator of
electronic gear
for position
command pulse
Refers to parameter PA12. 0-32767 0
80
Effective level
of command
direction signal
Set to:
0:High level is positive direction.
1:Low level is positive direction.
0-1 0
81
PULS signal
filter of
command pulse
1.To filter the input PULS signal.
2.The default value is the max pulse input
frequency: 500KHz(kpps). The value is bigger,
the max input frequency is slower.
3.To filter the noise from the signal line in
order to avoid incorrect counting happening. If
it goes wrong due to the incorrect counting,
you can increase the value of this parameter
properly.
4. After editing this parameter, please save it
0-15 4