C200H AC Servo Manual
55
6.2 Main Menu
The first layer is the main menu and has 8 operating modes in total. Press
or
button
to change the operation mode. Then press SET button to enter into the second layer and executes
a concrete operation. Press
button returns to the main menu from the second layer.
Pic6.2 Main Menu
6.3 Steps To Set Parameters
Select “PA-” and press SET button to enter the status of parameter setting mode. And use
or
to choose parameters and then press SET button to display the parameter value. You can
modify the value with
or
key. Press
key or
key once, the parameter value
increases or decreases by 1. Pressing and holding
or
key can make the value increased or
decreased continuously. After modifying the value of the parameter,please press SET button and
when the LED flashes two times, it means the setting is completed . Finally please recharge, then
the new parameter is effective.
Summary of Contents for C200H Series
