66
• Using the ‘ ’ button you can select whether the sensor belongs to the
closure group (‘
Y
Y
Y
Y
Y
’) or not (‘
N
N
N
N
N
’).
You can find further information on this on page 20 or page 46.
• If a door/window detector is registered, then registration is now com-
plete. The alarm base station is ready to register the next sensor. If there
are no further sensors to register, you can exit the registration proce-
dure by pressing the ‘
C
’ button three times. The alarm base station
then returns to the main level in the normal operating mode. See the figure
on the right.
• For a PIR motion detector the display illustrated here on the right appears
on the LCD for setting the response sensitivity.
The response sensitivity of the PIR motion detector can be set to a value
between 1 and 4, whereby ‘4’ represents the highest sensitivity. The
response sensitivity is factory set to ‘
3
3
3
3
3
’. Use the ‘ ’ or ‘ ’ button to select
the value you require.
• Pressing the ‘
OK
’ button allows you to register the next sensor (‘
X
X
X
X
X
’ is
the number of the next free sensor).
• Other sensors are registered with the alarm base station as described
above.
• If all the sensors are registered, you can exit the alarm base station’s
registration mode by pressing the ‘
C
’ button three times. You now return
to the normal display mode (main level).
sensit. 3
sensor X
clear
disarm
10:25 05.02
sensor X
clear
disarm
10:35 05.02
Summary of Contents for FAZ 3000-PIR-2
Page 115: ...115...
