98
Alarm upon
smoke
detection
0
Alarm when
int. armed
-
Alarm upon
attack
0
Alarm upon
sabotage
0
Alarm when
ext. armed
-
j) ‘FAZ 3000-PC-2’ PC interface settings
The following settings can be carried out for the ‘FAZ 3000-PC-2’ PC interface:
• Conditions for setting off the alarm
• Silent alarm on/off
1. Conditions for setting off the alarm, changing the settings
For the PC interface the conditions for setting off an alarm can be set in detail, and dependent
on the states ‘disarmed’, ‘internally armed’ and ‘externally armed’.
The PC interface is factory set to inactive or deactivated/switched off.
That means that no alarm triggering will activate it. It is up to you to set when the PC
interface should trigger an alarm.
Table containing the factory settings for the ‘disarmed’ state:
‘Disarmed’ state
• It is not possible to trigger the PC interface for ‘internally armed’ and ‘externally armed’ because
of the current ‘disarmed’ state (each set to ‘-’).
• If a smoke detector is triggered, no alarm is effected via the PC interface (set to ‘0’)
• If a sabotage contact is triggered, no alarm is effected via the PC interface (set to ‘0’)
• In the event of an attack, no alarm is effected via the PC interface (set to ‘0’)
Summary of Contents for FAZ 3000-PIR-2
Page 115: ...115...
