Conrad Electronic FAZ 3000-PIR-2, Operating Instructions Manual

Page: 68 / 115

68
3. Modify a sensor name or assign a sensor name retrospectively
Sensor names can, of course, be modified or assigned at a later stage.
• You must be on the main level. The LCD should appear as on the right,
for example, with the time and the date.
• Briefly press the ‘ Menü a/A ’ button on the operating unit of the ‘FAZ
3000-Z’ alarm base station.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
sensors sensors sensors sensors sensors
’ menu.
• Confirm your selection by briefly pressing the ‘ OK ’ button.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
sensors name sensors name sensors name sensors name sensors name
’ menu.
• Confirm your selection by briefly pressing the ‘ OK ’ button.
The first sensor that was registered with the alarm base station is
displayed.
• Use the ‘ ’ and ‘ ’ buttons to select the sensor (or the device using the
‘ ’ button) whose name you wish to modify/enter (for example, change
the capital ‘
D D D D D
’ in the name ‘
ChilD ChilD ChilD ChilD ChilD
’ to a small ‘
d d d d d
’, see the example on
the right).
• Briefly press the ‘ OK ’ button. Afterwards, the name can be modified or
entered.
To enter the letters use the 2-9 buttons, each of which represents
several letters (click through as with a mobile phone by repeatedly
and quickly pressing the same button).
Numbers and umlauts can also be found on the buttons (for instance,
‘Ä’).
Use the ‘ 0 ’ button to enter a space character.
Special characters can be entered using the ‘ ’ and ‘ ’ buttons.
You can use the ‘ Menü a/A ’ button to switch between lower and
upper case.
The cursor automatically jumps to the next position approx. one
second after the last button was pressed.
You can use the ‘ C ’ button to delete a character you entered by
mistake.
• Once you have entered the name you require, press the ‘ OK ’ button.
Afterwards, you return to the sensor list. You can now select another
sensor to modify.
• You can exit the name modification/entry function by pressing the ‘ C ’
button three times. This returns you to the normal display mode (main
level).
sensors
add
sensors
troubles
disarm
13:25 05.02
sensors
name
contact 1
livingr W1
smoke 3
chilD Dana
smoke 3
child_
disarm
14:01 05.02
smoke 3
child Dana