Conrad Electronic FAZ 3000-PIR-2, Operating Instructions Manual

Page: 65 / 115

65
• Close the sensor’s casing.
• Return to the alarm base station. The sensor type (for example, ‘
con- con-
con- con-
con-
tact tact tact tact tact
’, ‘
motion motion motion motion motion
’ or ‘
smoke smoke smoke smoke smoke
’) and the sensor number (‘
X X X X X
’) are dis-
played on the LCD.
• Use the buttons on the alarm base station to enter your chosen name
for the sensor, such as the installation location (in the example on the
right is a smoke detector that is installed in the children’s room belonging
to ‘Dana’; it is the third sensor to be registered by the user).
To enter the letters use the 2-9 buttons, each of which represents
several letters (click through as with a mobile phone by repeatedly
and quickly pressing the same button).
Numbers and umlauts can also be found on the buttons (for instance,
‘Ä’).
Use the ‘ 0 ’ button to enter a space character.
Special characters can be entered using the ‘ ’ and ‘ ’ buttons.
You can use the ‘ Menü a/A ’ button to switch between lower and
upper case.
The cursor automatically jumps to the next position approx. one
second after the last button was pressed.
You can use the ‘ C ’ button to delete a character you entered by
mistake.
• Once you have entered the name you require, press the ‘ OK ’ button.
If a smoke detector is registered, then registration is now complete and
the alarm base station is ready to register the next sensor. If there are
no further sensors to register, you can exit the registration procedure
by pressing the ‘
C ’ button three times. The alarm base station then
returns to the main level in the normal operating mode. See the figure
on the right.
• The display illustrated here on the right appears on the LCD for a door/
window detector or PIR motion detector.
• You can use the ‘ ’ button to set the sensor as an internal sensor
(‘
i n t e r n : Y i n t e r n : Y
i n t e r n : Y i n t e r n : Y i n t e r n : Y
’) or external sensor (‘
i n t e r n : i n t e r n :
i n t e r n : i n t e r n : i n t e r n :
N N
N N N
’).
‘
i n t e r n : i n t e r n : i n t e r n : i n t e r n : i n t e r n : N N N N N
’ External sensor; alarm is set off for ‘internally armed’
and ‘externally armed’
‘
i n t e r n : i n t e r n : i n t e r n : i n t e r n : i n t e r n : Y Y Y Y Y
’ Internal sensor; alarm is only set off for
‘externally armed’
For more detailed information, see page 46.
• By pressing the ‘ ’ button you can access the closure group settings
(the ‘ N ’ on the upper line is underlined. Use the ‘ ’ and ‘ ’ buttons to change
the entry line).
sens.type X
_
smoke 3
child Dana
close: N
intern: N
close: N
intern: N
sensor X
clear
disarm
10:23 05.02