Conrad Electronic FAZ 3000-PIR-2, Operating Instructions Manual

Page: 67 / 115

67
2. Delete sensors
Sensors that are no longer available (for example, sensors that are not required) must be deleted.
Otherwise the alarm base station considers the lack of sensor confirmation as a trouble
(‘
s e n s o r l o s t s e n s o r l o s t
s e n s o r l o s t s e n s o r l o s t s e n s o r l o s t
’).

If you accidentally remove the sensor’s batteries without previously setting the base
station to the ‘service/battery change’ mode, the sensor must also be deleted first and
then re-registered.
Carry out the following steps to delete a sensor:
• You must be on the main level. The LCD should appear as on the right,
for example, with the time and the date.
• Briefly press the ‘ Menü a/A ’ button on the operating unit of the ‘FAZ
3000-Z’ alarm base station.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
sensors sensors
sensors sensors sensors
’ menu.
• Confirm your selection by briefly pressing the ‘ OK ’ button.
• Use the ‘ ’ and ‘ ’ buttons to select the ‘
sensors delete sensors delete
sensors delete sensors delete sensors delete
’ menu.
• Confirm your selection by briefly pressing the ‘ OK ’ button.
The first sensor that was registered with the alarm base station is
displayed.
• Select the sensor that you wish to delete using the ‘ ’ and ‘ ’ buttons
or the device using the ‘ ’ button (in the example on the right this is the
door/window detector in the bedroom on window 1, which was reg-
istered as the fourth sensor).
• Press the ‘ OK ’ button briefly. The deletion of the sensor must be re-
confirmed. See the figure on the right.
Delete a sensor: Press the ‘ OK ’ button
Selected sensor is deleted
Cancel: Press the ‘ C ’ button
Selected sensor is not deleted
Pressing the ‘ OK ’ or ‘ C ’ button returns you to the sensor list and another
sensor can now be deleted.
• Once you have deleted all the sensors, the alarm base station’s deletion
mode can be exited by pressing the ‘ C ’ button three times. This returns
you to the normal display mode (main level).
sensors
add
sensors
troubles
disarm
12:25 05.02
sensors
delete
contact 1
livingr W1
contact 4
bedr W1
delete ?
Y:OK N:C
smoke 3
child Dana
disarm
12:25 05.02