103
• Keep pressing the ‘ ’ button until ‘
line 1
line 1
line 1
line 1
line 1
’ is displayed.
You are now in the list of all the wired alarm lines (‘line 1’ to ‘line 4’ and
‘sabotage’).
• Select the alarm line whose name you wish to modify or enter using the
‘ ’ and ‘ ’ buttons (for example, ‘
line 3
line 3
line 3
line 3
line 3
’).
No name can be assigned to the sabotage line (‘sabotage’).
• Press the ‘
OK
’ button briefly. A cursor appears on the lower line (‘_’).
You can now modify or enter the name.
To enter the letters use the 2-9 buttons, each of which represents
several letters (click through as with a mobile phone by repeatedly
and quickly pressing the same button).
Numbers and umlauts can also be found on the buttons (for instance,
‘Ä’).
Use the ‘
0
’ button to enter a space character.
Special characters can be entered using the ‘ ’ and ‘ ’ buttons.
You can use the ‘
Menü a/A
’ button to switch between lower and
upper case.
The cursor automatically jumps to the next position approx. one
second after the last button was pressed.
You can use the ‘
C
’ button to delete a character you entered by
mistake.
• Once you have entered the name you require, press the ‘
OK
’ button.
Afterwards, you return to the alarm line list.
You can select a further alarm line whose name you wish to enter or
modify using the ‘ ’ and ‘ ’ buttons.
• You can exit the name modification/entry function by pressing the ‘
C
’
button three times. This returns you to the normal display mode (main
level).
line 1
line 3
line 3
_
line 3
CellarDoor_
line 3
CellarDoor
disarm
13:50 05.02
Summary of Contents for FAZ 3000-PIR-2
Page 115: ...115...
