35
• The two slotted holes ‘
A
’ are used for
mounting the device to a wall. The slotted
holes make it particularly easy to align the
bracket vertically.
The central hole ‘
B
’ is used for mounting the
bracket to a ceiling.
• Position the bracket at a suitable location on a wall or on the ceiling.
• Use a sharp pencil to mark where the bracket is to be mounted through the screw holes.
• Depending on the type of surface you may have to drill holes and insert suitable dowels.
When drilling or fastening screws, be careful not to damage any power
supply lines, gas or water pipes as this could pose a life-threatening danger!
• Now use screws to attach the bracket to the wall or to the ceiling.
•
Do not insert the batteries yet. The casing should remain open at first.
Figure 28
Summary of Contents for FAZ 3000-PIR-2
Page 115: ...115...
