40
Setup (see from page 72):
The following basic settings for the alarm base station can be carried out in this menu:
• Set time/date
• DCF configuration for external DCF receivers: on/off or reception check (this setting is only
available when external DCF receiver is connected)
• Set the delay for ‘externally armed’ or ‘closure group’
• Enter security code for alarm system settings
• Enter security code for internal arming
• Enter security code for external arming
• Enter house code (when using several systems in close proximity, for example, in your own
or a neighbour’s home)
Run test (see page 56/57):
• Sensors’ function test
• Display on the base station
Int. siren (see from page 78):
This menu allows you to adjust the internal siren’s settings:
• Conditions for setting off the alarm
• Alarm
• Signal duration when internal arming is confirmed
• Signal duration when external arming is confirmed
Ext. siren (see from page 84):
Carry out the settings for the external siren in this menu:
• Conditions for setting off the alarm
• Duration for siren
• Duration for flash
Summary of Contents for FAZ 3000-PIR-2
Page 115: ...115...