Conrad Electronic FAZ 3000-PIR-2, Operating Instructions Manual

Page: 62 / 115

62
3. Scanning troubles & open contacts that prevent ‘externally armed’ arming
You can use this scanning option to determine what it was that prevented the ‘externally armed’
arming.
As you can see in section 13, page 58, it should be possible to arm the system to ‘ externally
armed ’ the first time you press the ‘ extern scharf ’ (external arm) button on the remote control
or the alarm base station.
If you find that you need to press the button a second time, you can now determine what the cause
is.
• You are in the main menu and the LCD appears as shown on the right,
for example.
• Briefly press the ‘ Menü a/A ’ button. The ‘
troubles troubles troubles troubles troubles
’ menu is displayed
on the LCD.
• Briefly press the ‘ OK ’ button. The display on the right appears, for example
(window in the living room is open).
• Press the ‘ extern scharf ’ (external arm) button. ‘
preventions preventions preventions preventions preventions
ext. ext. ext. ext. ext. arm arm arm arm arm
’ (external arm prevention) appears briefly on the LCD.
• Using the ‘ ’ and ‘ ’ buttons, the sensors, which prevent external arming,
can be scanned individually and in succession.
In the example figure on the right the door/window detector in the living
room is the cause.
• You can use the ‘ ’ button to display the troubles for the selected sensor.
As you can see in the example on the right, the magnet contact is open
(the window is probably open, however, the magnet that was stuck
on may also have fallen off?).
• If necessary, remove the trouble (for example, close the window, stick
the magnet contact on again and so on).
• Return to the alarm base station and keep pressing the ‘ C ’ button until
you return to the alarm base station’s main menu.
If ‘
disarm disarm disarm disarm disarm
’ appears on the LCD, then the trouble has been removed.
Otherwise, check again whether any further troubles exist, and if so,
which troubles are present (for instance, another window may be open
and so on).
If there are no troubles, ‘
no troubles no troubles no troubles no troubles no troubles
’ appears when you press
the ‘ OK ’ button in the ‘
troubles troubles
troubles troubles troubles
’ menu (see above).
preventions
ext. arm
contact 1
livingr W1
troubles
cont. open
18:06 29.12
contact 1
livingr W1
contact
open
disarm
18:10 29.12
n o
troubles