54
12. Function test for the complete set
After installation and mounting is completed, and you have registered the sensors with the alarm
base station, the complete set (or a single alarm base station with separately purchased sensors
and so on) is ready for use with its basic functions.
In order to test the operational reliability (whether the sensors work properly and activate in the
event of an alarm) and to familiarise yourself with the alarm base station, you should carry out
the function test that is described below.
The ‘FAZ 3000’ wireless alarm system carries out an automatic self-check every 10
minutes.
In addition, each sensor and each peripheral device (for example, door/window detector)
establishes a wireless connection with the alarm base station at 10 minute intervals
and informs the alarm base station of its status.
The base station confirms the receipt of the status signal with the sensor.
In this way, the wireless connection is tested in both directions, which guarantees
a particularly secure transmission.
The alarm base station is also notified of the sensor or peripheral device’s battery level.
If the battery is low, this is indicated as a trouble on the alarm base station’s display.
Summary of Contents for FAZ 3000-PIR-2
Page 115: ...115...
