Cisco Linksys SFE1000P Reference Manual Download

Page: 202 / 237

194

Chapter 16: Configuring System Time

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

–

Month —

The month of the year in which DST ends. The possible field range is Jan-Dec.

–

Year—

The year in which the configured DST ends.

–

Time —

The time at which DST starts. The field format is Hour:Minute, for example,

05:30.

•

Recurring —

Select if the DST period in countries other than USA or European is

constant from year

to year. The possible field values are:

•

From —

Indicates the day and time that DST begins each year. For example, DST begins locally every

second Sunday

in April at 5:00 am. The possible field values are:

–

Day —

The day of the week from which DST begins every year. The possible field range is

Sunday-

Saturday.

–

Week —

The week within the month from which DST begins every year. The possible

field range is 1-5.

–

Month —

The month of the year in which DST begins every year. The possible field

range is Jan.-Dec.

–

Time —

The time at which DST begins every year. The field format is Hour:Minute, for

example, 02:10.

•

To —

Indicates the day and time that DST ends each year. For example, DST ends locally every fourth

Friday

in October at 5:00 am. The possible field values are:

–

Day —

The day of the week at which DST ends every year. The possible field range is

Sunday-Saturday.

–

Week —

The week within the month at which DST ends every year. The possible field

range is 1-5.

–

Month —

The month of the year in which DST ends every year. The possible field range

is Jan.-Dec.

–

Time —

The time at which DST ends every year. The field format is Hour:Minute, for

example, 05:30.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands