Cisco Linksys SFE1000P Reference Manual Download

Page: 54 / 237

Chapter 5: Configuring Device Security
Defining 802.1x

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

•

Guest VLAN

— Specifies whether the Guest VLAN is enabled on the device. The possible

field values are:

–

Checked

— Enables using a Guest VLAN for unauthorized ports. If a Guest VLAN is

enabled, the unauthorized port automatically joins the VLAN selected in the

VLAN List

field.

–

Unchecked

— Disables use of a Guest VLAN for unauthorized ports. This is the default.

•

Guest VLAN ID

— Contains a list of VLANs. The Guest VLAN is selected from the VLAN list.

Defining Port Authentication

802.1X

Port Authentication Page

The

802.1X Port Authentication Page

contains the following fields:

•

Copy From Entry Number

— Indicates the row number from which port authentication

parameters are copied.

•

To Entry Number(s)

— Indicates the row number to which port authentication parameters

are copied.

•

Port

— Displays a list of interfaces on which port-based authentication is enabled.

•

User Name

— Displays the user name.

•

Current Port Control

— Displays the current port authorization state.

•

Guest VLAN

— Displays the Guest VLAN.

•

Periodic Reauthentication

— Permits immediate port reauthentication.

•

Reauthentication Period

— Specifies the number of seconds in which the selected port is

reauthenticated (Range: 300-4294967295). The field default is 3600 seconds.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands