Cisco Linksys SFE1000P Reference Manual Download

Page: 160 / 237

152

Chapter 12: Configuring SNMP
Defining Trap Management

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

Modifying SNMP Notifications Settings

The

Edit SNMP Notification Page

allows system administrators to define notification settings. The

Edit SNMP Notification Page

is divided into four areas, Notification Recipient, SNMPv1,2

Notification Recipient, SNMPv3 Notification Recipient and UDP Port Notification Recipient.

Edit SNMP Notification Page

The

Edit SNMP Notification Page

contains the following fields:

•

Recipients IP

— Indicates the IP address to whom the traps are sent.

•

Notification Type

— Defines the notification sent. The possible field values are:

–

Trap

— Indicates traps are sent.

–

Inform

— Indicates informs are sent.

Either SNMPv1,2 or SNMPv3 may be used as the version of traps, with only one version enabled at
a single time. The SNMPv1,2 Notification Recipient area contains the following fields:

•

SNMPv1,2

— Enables SNMPv1,2 as the Notification version. If SNMPv1,2 is enabled, the

Community String

and

Notification Version

fields are enabled for configuration.

•

Community String

— Identifies the community string of the trap manager.

•

Notification Version

— Determines the trap type. The possible field values are:

–

SNMP V1

— Indicates SNMP Version 1 traps are sent.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands