manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

180

Chapter 14: Managing System Files
File Management Overview

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

14

•

Source File 

— Specifies the file to be downloaded.

•

Destination File 

— Specifies the name of the file after it is downloaded (Save As).

Save Configuration

The configuration files control the operation of the switch, and contain the functional settings at the 
device and the port level. Configuration files are one of the following types:

•

Factory Default

 — Contains preset default parameter definitions which are downloaded 

with a new or upgraded version.

•

Running Configuration

 — Contains the parameter definitions currently defined on the 

device. This includes any configuration changes made since the device was started or 
rebooted. When the device shuts down or reboots the next time, this configuration becomes 
the Starting Configuration.

•

Starting configuration

 — Contains the parameter definitions which were valid in the 

Running Configuration when the system last rebooted or shut down.

•

Backup configuration

 — Contains a copy of the system configuration for protection against 

system shutdown, or for maintenance of a specific operating state.

File names cannot contain slashes (\ or /), the leading letter of the file name should not be a period 
(.), and the maximum length for file names on the TFTP server is 127 characters or 31 characters for 
files on the switch. (Valid characters: A-Z, a-z, 0-9, “.”, “-”, “_”). In the 

Save Configuration Page

, 

define the parameters of the system configuration files.

Save Configuration Page

The 

Save Configuration Page

 contains the following fields:

•

Upgrade

 — Specifies that the configuration file is associated with a firmware upgrade.

•

Backup

 — Specifies that the configuration file contains the system backup configuration.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Garland P1GCCAS Installation Manual preview
P1GCCAS
Brand: Garland Pages: 4
D-Link DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network... User Manual preview
DGE-560T - Gigabit PCI-Express SNMP VLAN Flow Control Network...
Brand: D-Link Pages: 53
Planet GSW-1602SF User Manual preview
GSW-1602SF
Brand: Planet Pages: 20
NEC P401-TMX4D User Manual preview
P401-TMX4D
Brand: NEC Pages: 2
Xenya XS26GS User Manual preview
XS26GS
Brand: Xenya Pages: 189
B+B SmartWorx spectre lte User Manual preview
spectre lte
Brand: B+B SmartWorx Pages: 52
Supermicro AOC-MGP-i2 User Manual preview
AOC-MGP-i2
Brand: Supermicro Pages: 27
BEC 7404 Series User Manual preview
7404 Series
Brand: BEC Pages: 159
Zhone ETHX-2214-DS3 Installation Instructions Manual preview
ETHX-2214-DS3
Brand: Zhone Pages: 28
Stahl HFisolator 9730/26-11 Operating Instructions preview
HFisolator 9730/26-11
Brand: Stahl Pages: 2
MICRADIGITAL F5D7630uk4A-E Speci?Cations preview
F5D7630uk4A-E
Brand: MICRADIGITAL Pages: 2
SmartBridges airPoint Nexus sB3210 User Manual preview
airPoint Nexus sB3210
Brand: SmartBridges Pages: 55
Goonas LC180 User Manual preview
LC180
Brand: Goonas Pages: 13
H3C WT2024-U-PWR Compliance And Safety Manual preview
WT2024-U-PWR
Brand: H3C Pages: 51
NETGEAR DG834GUV5 User Manual preview
DG834GUV5
Brand: NETGEAR Pages: 120
SMC Networks EZ Switch SMC-1026DT V.2 User Manual preview
EZ Switch SMC-1026DT V.2
Brand: SMC Networks Pages: 27
Patton electronics SmartNode 4634 Series Quick Start Manual preview
SmartNode 4634 Series
Brand: Patton electronics Pages: 12
TP-Link TL-WR840N Quick Installation Manual preview
TL-WR840N
Brand: TP-Link Pages: 2

Brands by name

Popular brands

Load more brands