Cisco Linksys SFE1000P Reference Manual Download

Page: 106 / 237

Chapter 8: Configuring IP Information
Domain Name System

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

•

Active Server

— Specifies the DNS server that is currently active.

Add DNS Server

The

Add DNS Server Page

allows system administrators to define new DNS servers.

Add DNS Server Page

The Add DNS Server Page page contains the following fields.

•

DNS Server

— Displays the DNS server’s IP address.

•

DNS Server Currently Active

— Displays the DNS server which is currently active.

•

Set DNS Server Active

— Indicates active status of the new DNS Server. The possible values

are:

–

Checked

— This new server becomes the active DNS Server.

–

Unchecked

— This new server is not the active DNS Server.

Mapping DNS Hosts

The

Host Mapping Page

provides information for defining DNS Host Mapping.

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands