manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

140

Chapter 12: Configuring SNMP
Defining SNMP Users

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

12

•

Password

 — Define the local user password. Local user passwords can contain up to 159 

characters. This field is available if the Authentication Method is a password.

•

Authentication Key

 — Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. 

The authentication and privacy keys are entered to define the authentication key. If only 
authentication is required, 16 bytes are defined. If both privacy and authentication are 
required, 32 bytes are defined. Each byte in hexadecimal character strings is two 
hexadecimal digits. Each byte can be separated by a period or a colon. This field is 
available if the Authentication Method is a key.

•

Privacy Key

 — Defines the Privacy Key (LSB). If only authentication is required, 20 bytes are 

defined. If both privacy and authentication are required, 36 bytes are defined. Each byte in 
hexadecimal character strings is two hexadecimal digits. Each byte can be separated by a 
period or colon. This field is available if the Authentication Method is a key.

Modifying SNMP Users

The 

Edit SNMP User Page 

provides information for assigning SNMP access control privileges to 

SNMP groups. The 

Edit SNMP User Page 

contains the following fields.

•

User Name 

— Displays the user-defined group to which access control rules are applied. 

Provides a user-defined local user list.

•

Engine ID 

— Indicates the local device engine ID.

•

Group Name

 — SNMP group, which can be chosen from the list, to which the SNMP user 

belongs. SNMP groups are defined in the SNMP Group Profile page.

•

Authentication Method

— Indicates the Authentication method used. The possible field 

values are:

–

MD5 Key 

— Users are authenticated using the HMAC-MD5 algorithm.

–

SHA Key 

— Users are authenticated using the HMAC-SHA-96 authentication level. 

–

MD5 Password

 — The HMAC-MD5-96 password is used for authentication. The user 

should enter a password.

–

SHA Password

 — Users are authenticated using the HMAC-SHA-96 authentication 

level. The user should enter a password.

–

None 

— No user authentication is used. 

•

Password

 — Define the local user password. Local user passwords can contain up to 159 

characters. This field is available if the Authentication Method is a password.

•

Authentication Key

 — Defines the HMAC-MD5-96 or HMAC-SHA-96 authentication level. 

The authentication and privacy keys are entered to define the authentication key. If only 
authentication is required, 16 bytes are defined. If both privacy and authentication are 
required, 32 bytes are defined. Each byte in hexadecimal character strings is two 
hexadecimal digits. Each byte can be separated by a period or a colon. This field is 
available if the Authentication Method is a key.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Panasonic KX-UDS124 Important Information Manual preview
KX-UDS124
Brand: Panasonic Pages: 44
Parkside POF 1200 A1 Operation Manual preview
POF 1200 A1
Brand: Parkside Pages: 55
Parkside POF 1200 A1 Operation And Safety Notes preview
POF 1200 A1
Brand: Parkside Pages: 34
Mastervolt MasterBus Tanklevel Interface User And Installation Manual preview
MasterBus Tanklevel Interface
Brand: Mastervolt Pages: 8
Kasda LinkSmart KW6515 User Manual preview
LinkSmart KW6515
Brand: Kasda Pages: 31
Kaptia Klever Getting Started preview
Klever
Brand: Kaptia Pages: 14
AC&NC JetStor NAS 724UX User Manual preview
JetStor NAS 724UX
Brand: AC&NC Pages: 117
Quantum QWCM Installation Manual preview
QWCM
Brand: Quantum Pages: 7
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
Maipu SM3100-28TC-AC Install Manual preview
SM3100-28TC-AC
Brand: Maipu Pages: 19
Matrix Switch Corporation MSC-1HD1608L Product Manual preview
MSC-1HD1608L
Brand: Matrix Switch Corporation Pages: 60
Maipu SM3100-9TC-AC Install Manual preview
SM3100-9TC-AC
Brand: Maipu Pages: 26
Dantel 44118 Installation & Operation Manual preview
44118
Brand: Dantel Pages: 22
Hypercom IN-tact 1201 Brochure & Specs preview
IN-tact 1201
Brand: Hypercom Pages: 2
Commax CVN-0430F User Manual preview
CVN-0430F
Brand: Commax Pages: 122
Caimore CM520-86WG User Manual preview
CM520-86WG
Brand: Caimore Pages: 79

Brands by name

Popular brands

Load more brands