manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

12

Chapter 4: Managing Power-over-Ethernet Devices

 

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

4

Managing Power-over-Ethernet Devices

Power-over-Ethernet (PoE) provides power to devices over existing LAN cabling, without updating or 
modifying the network infrastructure. Power-over-Ethernet removes the necessity of placing network 
devices next to power sources.

Power-over-Ethernet can be used in the following applications:

• IP  Phones

• Wireless Access Points

• IP  Gateways

• PDAs

• Audio and video remote monitoring

Powered Devices are devices which receive power from the device power supplies, for example IP 
phones. Powered Devices are connected to the device via Ethernet ports. Guard Band protects the 
device from exceeding the maximum power level. For example, if 400W is maximum power level, 
and the Guard Band is 20W, if the total system power consumption exceeds 380W no additional 
PoE components can be added. The accumulated PoE components power consumption is rounded 
down for display purposes, therefore remove value after decimal point.

NOTE: 

Due to hardware limitations, the power 

measurement accuracy is 4%.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Salto Node Installation Manual preview
Node
Brand: Salto Pages: 2
Dust Networks SmartMesh IA-510 D2511 Manager'S Manual preview
SmartMesh IA-510 D2511
Brand: Dust Networks Pages: 30
Draytek Vigor 2700G Specifications preview
Vigor 2700G
Brand: Draytek Pages: 2
Genie IP8ESP User Manual preview
IP8ESP
Brand: Genie Pages: 6
Idis DR-1500 Series Quick Manual preview
DR-1500 Series
Brand: Idis Pages: 17
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
Hawking H-CF30W Quick Installation Manual preview
H-CF30W
Brand: Hawking Pages: 21
ORiNG TGXPS-1080-M12-MV Series Quick Installation Manual preview
TGXPS-1080-M12-MV Series
Brand: ORiNG Pages: 2
Paradyne 1740 SHDSL User Manual preview
1740 SHDSL
Brand: Paradyne Pages: 74
Xantech RT1610 Installation Instructions Manual preview
RT1610
Brand: Xantech Pages: 6
MICRADIGITAL F5D7630uk4A-E Speci?Cations preview
F5D7630uk4A-E
Brand: MICRADIGITAL Pages: 2
8e6 Technologies HL-002-006 Quick Start Manual preview
HL-002-006
Brand: 8e6 Technologies Pages: 94
Sharedband Power Router 2 Configuration Manual preview
Power Router 2
Brand: Sharedband Pages: 3
Foxconn RAID Foldout Introduction preview
RAID Foldout
Brand: Foxconn Pages: 1
MikroTik wAP series User Manual preview
wAP series
Brand: MikroTik Pages: 5
Planet MGSD SERIES Quick Installation Manual preview
MGSD SERIES
Brand: Planet Pages: 16
ORANGE livebox Installation Manual preview
livebox
Brand: ORANGE Pages: 8
Eaton Simatic S7 PG User Manual preview
Simatic S7 PG
Brand: Eaton Pages: 24

Brands by name

Popular brands

Load more brands