Cisco Linksys SFE1000P Reference Manual Download

Page: 153 / 237

145

Chapter 12: Configuring SNMP
Defining SNMP Communities

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

•

Group Name

— Displays advanced SNMP communities group name.

Adding SNMP Communities

The

Add SNMP Community Page

allows network managers to define and configure new SNMP

communities.

Add SNMP Community Page

The

Add SNMP Community Page

contains the following fields:

•

SNMP Management Station

— Defines the management station IP address for which the

SNMP community is defined. There are two definition options:

–

Define the management station IP address.

–

All

, which includes all management station IP addresses.

•

Community String

— Defines the password used to authenticate the management station to

the device.

Configure either the Basic Mode or the Advanced Mode.

Basic

— Enables

SNMP Basic mode for a selected community and contains the following fields:

•

Access Mode

— Defines the access rights of the community. The possible field values are:

–

Read Only

— Management access is restricted to read-only, and changes cannot be

made to the community.

–

Read Write

— Management access is read-write and changes can be made to the

device configuration, but not to the community.

–

SNMP Admin

— User has access to all device configuration options, as well as

permissions to modify the community.

•

View Name

— Contains a list of user-defined SNMP views.

Advanced

— Enables

SNMP Advanced mode for a selected community and contains the

following field:

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands