manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

203

Chapter 17: Viewing Statistics
Viewing GVRP Statistics

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

17

Viewing GVRP Statistics

The 

GVRP Page 

contains statistics for GVRP communication on the device. 

GVRP Page

The 

GVRP Page

 is divided into two areas, GVRP Statistics Table and GVRP Error Statistics Table. 

The following fields are relevant for both tables:

•

Interface

—Specifies the interface type for which the statistics are displayed.

–

Port 

— Indicates if port statistics are displayed.

–

LAG 

— Indicates if LAG statistics are displayed.

•

Refresh Rate

—Indicates the amount of time that passes before the GVRP statistics are 

refreshed. The possible field values are: 

–

15 Sec — 

Indicates that the GVRP statistics are refreshed every 15 seconds.

–

30 Sec 

— Indicates that the GVRP statistics are refreshed every 30 seconds.

–

60 Sec 

— Indicates that the GVRP statistics are refreshed every 60 seconds.

–

No Refresh 

— Indicates that the GVRP statistics are not refreshed.

The GVRP Received Transmitted Table contains the following fields: 

•

Join Empty 

— Displays the device GVRP Join Empty statistics.

•

Empty 

— Displays the device GVRP Empty statistics.

•

Leave Empty 

— Displays the device GVRP Leave Empty statistics.

•

Join In 

— Displays the device GVRP Join In statistics.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

D-Link DSL-2730B Technical Support preview
DSL-2730B
Brand: D-Link Pages: 5
D-Link GO-SW-5E Quick Install Manual preview
GO-SW-5E
Brand: D-Link Pages: 2
MA lighting grandMA2 Series Quick Manual preview
grandMA2 Series
Brand: MA lighting Pages: 36
Valcom VIP-822 Manual preview
VIP-822
Brand: Valcom Pages: 3
Valcom VIP-814 User Manual preview
VIP-814
Brand: Valcom Pages: 4
ZyXEL Communications P-660W-T1 v2 User Manual preview
P-660W-T1 v2
Brand: ZyXEL Communications Pages: 244
Valcom VIP-822A Quick Start Manual preview
VIP-822A
Brand: Valcom Pages: 4
QuickLink QL-CXS Installation Manual preview
QL-CXS
Brand: QuickLink Pages: 8
Quantum QWCM Installation Manual preview
QWCM
Brand: Quantum Pages: 7
Idis DR-1500 Series Quick Manual preview
DR-1500 Series
Brand: Idis Pages: 17
Planet IGS-5225-20T4C2X Quick Installation Manual preview
IGS-5225-20T4C2X
Brand: Planet Pages: 16
Hanwha Techwin Wisenet PRN-6400DB4 User Manual preview
Wisenet PRN-6400DB4
Brand: Hanwha Techwin Pages: 125
Perle IRG5540 Quick Start Manual preview
IRG5540
Brand: Perle Pages: 4
C&H Technologies EM405-8 User Manual preview
EM405-8
Brand: C&H Technologies Pages: 50
ENKHO 154699.01 Original Instructions Manual preview
154699.01
Brand: ENKHO Pages: 48
Inter-m S- Media Manual preview
S- Media
Brand: Inter-m Pages: 20
Belkin F9K1002V1 User Manual preview
F9K1002V1
Brand: Belkin Pages: 42
Hanwha Techwin Wisenet XRN-6410DB4 User Manual preview
Wisenet XRN-6410DB4
Brand: Hanwha Techwin Pages: 118

Brands by name

Popular brands

Load more brands