Cisco Linksys SFE1000P Reference Manual Download

Page: 13 / 237

Chapter 2: Getting Started
Understanding the Interface

SFE1000P Gigabit Ethernet Switch Reference Guide

Chapter

Linksys User Interface Components

This section provides the following additional information:

•

Device Representation —

Provides an explanation of the Linksys user interface buttons, including both

management buttons and task icons.

•

Using the Linksys Management Buttons —

Provides instructions for adding, modifying, and deleting

device parameters.

3 Table Area

The Table area enables navigating through the different device
features. Click the tabs to view all the components under a specific
feature.

4 EWS Information

The EWS information tabs provide access to the online help, contains
information about the EWS.

Component Description

Summary of Contents for Linksys SFE1000P













































































































































































































































Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands

Cisco Linksys SFE1000P, Reference Manual

Search results

Summary of Contents for Linksys SFE1000P

Reviews:

Related manuals for Linksys SFE1000P

Brands by name

Popular brands