Cisco Linksys SFE1000P Reference Manual Download | Manualshive

Page: 116 / 237

background image

108

Chapter 10: Configuring Multicast Forwarding
IGMP Snooping

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

10

Configuring Multicast Forwarding

The Multicast section contains the following pages:

• IGMP Snooping

• Defining Multicast Bridging Groups

• Defining Multicast Forwarding

IGMP Snooping

When IGMP Snooping is enabled globally, all IGMP packets are forwarded to the CPU. The CPU
analyzes the incoming packets and determines:

• Which ports want to join which Multicast groups.

• Which ports have Multicast routers generating IGMP queries.

• Which routing protocols are forwarding packets and Multicast traffic.

Ports requesting to join a specific Multicast group issue an IGMP report, specifying that Multicast
group is accepting members. This results in the creation of the Multicast filtering database.

IGMP Snooping Page

The

IGMP Snooping Page

contains the following fields:

•

Enable IGMP Snooping Status

— Indicates that the device monitors network traffic to

determine which hosts want to receive multicast traffic.IGMP Snooping can be enabled only
if Bridge Multicast Filtering is enabled. The possible field values are:

–

Checked

— Enables IGMP Snooping on the device.

«
...
114
115
116
117
118
...
»

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Brand: Barracuda Networks Pages: 2

xStack Storage DSN-4000 Series

Brand: D-Link Pages: 5

Brand: CSS Pages: 2

Sure Cross DX70

Brand: Banner Pages: 35

Brand: Matrix Switch Corporation Pages: 61

Brand: Winext Pages: 37

Brand: Allnet Pages: 12

Brand: Telebyte Pages: 19

Brand: Ravpower Pages: 27

IPAM-1600s Series

Brand: C-Com Pages: 148

Brand: Moxa Technologies Pages: 51

Brand: Cowfish Technologies Pages: 38

Brand: Network Critical Pages: 200

Brand: Vacron Pages: 16

D-Link DSL-2640U

Brand: Broadband Products Pages: 12

Brand: Handicare Pages: 60

Brand: Zalip Pages: 76

Brand: Wave wifi Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands