manualshive.com logo in svg

Cisco Linksys SFE1000P, Reference Manual

The Cisco Linksys SFE1000P is a powerful networking device that combines fast Ethernet connectivity with PoE (Power over Ethernet) capabilities. To fully harness its features and optimize performance, users can access the comprehensive Administration Manual, available for free download from our website manualshive.com.

Share
Download
background image

138

Chapter 12: Configuring SNMP
Defining SNMP Users

 

SFE1000P Gigabit Ethernet Switch Administration Guide

Chapter

12

Defining SNMP Users

The 

SNMP Users Page

 provides information for creating SNMP groups, and assigning SNMP access 

control privileges to SNMP groups. Groups allow network managers to assign access rights to 
specific device features, or feature aspects. 

SNMP Users Page

The 

SNMP Users Page 

contains the following fields.

•

User Name 

— Displays the user-defined group to which access control rules are applied. 

The field range is up to 30 characters.

•

Group Name 

— User-defined SNMP group to which the SNMP user belongs. SNMP groups 

are defined in the 

SNMP Group Profile Page

.

•

Engine ID 

— Indicates the local device engine ID.

•

Authentication 

— Indicates the Authentication method used.

Summary of Contents for Linksys SFE1000P














































































































































































































































Reviews:

No comments

Related manuals for Linksys SFE1000P

Rain Bird E-3 Installation, Programming & Operation Manual preview
E-3
Brand: Rain Bird Pages: 17
XAVI Technologies Corp. 7721r User Manual preview
7721r
Brand: XAVI Technologies Corp. Pages: 71
Amperes iPX5500 Instruction Manual preview
iPX5500
Brand: Amperes Pages: 8
Hanwha Techwin Wisenet PRN-6400B4 Quick Manual preview
Wisenet PRN-6400B4
Brand: Hanwha Techwin Pages: 14
Buffalo LS520D Series Quick Setup Manual preview
LS520D Series
Brand: Buffalo Pages: 2
Ubiquiti PowerBeam PBE-5AC-400-ISO Quick Start Manual preview
PowerBeam PBE-5AC-400-ISO
Brand: Ubiquiti Pages: 23
AOpen ISDN SOHO Router User Manual preview
ISDN SOHO Router
Brand: AOpen Pages: 89
QTech QSW-2900 User Manual preview
QSW-2900
Brand: QTech Pages: 406
BinTec BIANCA/BRI Getting Started preview
BIANCA/BRI
Brand: BinTec Pages: 34
iDirect iNFINITI 3000 Installation And Commissioning Manual preview
iNFINITI 3000
Brand: iDirect Pages: 72
Addonics Technologies Network Adapter ADZIFCF Installation Manual preview
Network Adapter ADZIFCF
Brand: Addonics Technologies Pages: 1
Juniper TX MATRIX Hardware Manual preview
TX MATRIX
Brand: Juniper Pages: 396
R3 Bridge E User Manual preview
Bridge E
Brand: R3 Pages: 48
ATCOM AXE2DL + EC64L User Manual preview
AXE2DL + EC64L
Brand: ATCOM Pages: 18
HighPoint NA381TB Quick Installation Manual preview
NA381TB
Brand: HighPoint Pages: 3
Moxa Technologies PowerTrans PT-7728 Hardware Installation Manual preview
PowerTrans PT-7728
Brand: Moxa Technologies Pages: 8
Westlock Controls Corporation Intellis 7604 Installation And Operation Manual preview
Intellis 7604
Brand: Westlock Controls Corporation Pages: 39
Billion BiPAC 7820NZ User Manual preview
BiPAC 7820NZ
Brand: Billion Pages: 100

Brands by name

Popular brands

Load more brands